Cacheng CMP 120 RM Magnetic Pump, Chemical and Acid Pump Single Phase (220V)

What is the Magnet Pump CMP 120RM Magnetic Pump?

The general features of magnetic pumps include a rotating impeller located in a closed housing, supported by a magnetic field produced by magnets. The rotation of the impeller generates a force that moves the liquid in and out of the pump's housing.

The primary purpose of the pump is to maintain energy and motion within a liquid. Magnetic pumps have impellers and magnets connected to the motor.

Permanent magnets are connected to the pump's drive mechanism. The drive magnet, which drives the internal rotor, is connected to a second shaft powered by the motor. When the motor starts, it rotates its magnet.

The magnetic force from the motor's magnet enables the magnet in the impeller to rotate, causing the impeller to turn.

Magnetic pumps are centrifugal pumps, meaning that the liquid being pumped exits the pump at a different point than where it was drawn in.

The rotation of the impeller causes an increase in the energy of the liquid and an increase in the pressure at which the liquid is expelled from the pump. This increase in pressure is what prevents the fluid from moving.

Pump Body: GFRPP Polypropylene
Impeller: GFRPP Polypropylene
Package Dimensions (Width-Length-Height): 27x39x25 cm
Boxed Weight: 9.70 kg
Magnetic pumps do not have suction capability; they operate by flow and do not create a vacuum.

Magnet Pump CMP 120RM Magnetic Pump Specifications

• Motor Power: 200 watts
• Inlet-Outlet: 1"
• Suction Depth: CANNOT SUCK.
• Maximum Discharge Height: 10.5 meters
• Maximum Flow Rate: 220 liters/minute
• Max. Liquid Temperature: Ranges from 0°C to 82°C
• Voltage: 50 Hz - 220 Volts
• All surfaces in contact with liquid are polypropylene.

Polypropylene

• Has good resistance to acids. Preferred in food, chemical, and cosmetic products. Suitable for use at temperatures between 0˚C and 82˚C.

Fluids Suitable for Use with the Pump