24 Volt DC Solar Powered 250 Watt Hydrophore 1 Floor 1 Flat

24 Volt DC Solar Powered 250 Watt Hydrophore 1 Floor 1 Flat

Our product operates on 24V DC electricity and is specially designed for use in solar energy and photovoltaic systems. It can work with either a battery or directly from a solar panel. However, to avoid issues from electricity fluctuations, it is recommended to operate with an inverter or driver.

It is a high-quality and efficient product, with similar capacity to an AC-powered pump. It provides a pressure of 2.8 bar and has a water transfer capacity of 2.2 tons per hour.

If you plan to operate the product with a solar panel, you will need to install a minimum 300 Watt panel. The recommended setup is to connect two 200 Watt panels in series. If using a battery, you can use two 60-amp batteries connected in series.

Features of the 24 Volt DC Solar Powered 250 Watt Hydrophore 1 Floor 1 Flat

• Suitable for suction from tanks or the grid.
• Not suitable for suction from wells.
• Ideal for use in caravans and boats. Can operate with two 60-amp batteries connected in series.
• Draws 10 amps of energy.
• 250-watt motor power.
• Inlet/Outlet Size: 1"
• Maximum Water Temperature: +40°C

Technical Specifications of the 24 Volt DC Solar Powered 250 Watt Hydrophore 1 Floor 1 Flat

• Voltage: 24 Volt DC
• Power: 250 Watt (0.33 HP)
• Current: 10.5 Amps
• Inlet/Outlet Size: 1"
• Maximum Head: 28 Meters
• Maximum Flow Rate: 2.2 m³/h
• Maximum Water Temperature: +40°C
• Pump Weight: 3.25 Kg