EPC LS-4 Hydromat - Pump Hydrophore Automatic

Hydrophore automatic cannot be used alone, it is installed on the water pump and provides automatic operation of the pump.

Hydromats are used to turn the pump into a hydrophore without a water tank and pressure switch by installing it on the pump's discharge port. Direct connection to the network can be made without using a water tank.

Hydromats operating pressure can be adjusted and it stops automatically in case of waterless operation, and starts working automatically when water is supplied without requiring resetting.

There are 3 warning lights on the hydromat, it warns the user with light in case of malfunction. Water pump automatics do not create odor in the water or are hygienic devices with no side effects.

Hydromat Features
LS-4 automatic hydrophore device automatically stops the pump when the water coming from the suction runs out. Hydrophore automatic prevents the pump from working without water.
Pump hydrophore automatic automatically starts the pump when water usage starts. It stops the pump when water usage ends.
It is used in min 2.7 bar pressure and max 1.5 Hp single-phase pumps.
WATER PUMP AUTOMATIC HARDWARE
For easy and safe electrical installation, there is a socket and a 100 cm cable plug on the device.
A check valve is integrated into the device.
There is also no need to use a check valve. There is a manometer on the LS-4 device so that the pressure in the installation can be seen and the pump operation settings can be made.
Hydrophore Automatic Technical Specifications
Voltage: 220/240 Vyak
Maximum Current: 10 Ampere
Frequency: 50/60 Hz
Protection Level: IP 65
Maximum Water Temperature: 90 ºC
Input Pressure: Adjustable between 1.5 - 3 Bar.
Maximum Pressure: 10 Bar
Input - Output: 1" Male Connection