Kent 24 Volt Diesel Transfer Pump, DC Mini Submersible Pump with Strainer 50 mm Outer Diameter

Submersible Pumps for Transferring Diesel, Water, and Milk

These practical submersible pumps are designed for transferring diesel fuel, water, and milk. They are extremely efficient pumps capable of delivering up to 30 liters per minute and reaching heights of 5 meters. You can connect them to your desired energy source at the appropriate amperage and voltage.

You can use them for transferring liquids from tank to barrel or from barrel to tank, or in any area where liquid transfer is needed. For easy use, a 3-meter cable with connection terminals is included.

The transfer pump is designed to be easy, convenient, and safe for transferring diesel fuel and similar structural liquids using battery electricity. Note: They should not be used for transferring flammable and explosive substances such as gasoline, thinner, acids, or gases.

• Transfer Capacity: 30 liters per minute
• Operating Voltage: DC 24 Volts
• Liquid Temperature: Works up to +30 degrees Celsius and ambient temperature up to +40 degrees Celsius
• Applications: Ideal for transferring in boats, yachts, machines, harvesters, trucks, trailers, and similar vehicles.

Instructions for Use:

1. Securely attach a maximum 5-meter hose to the pump with a clamp.
2. Submerge the pump in the liquid.
3. Connect the clamps to the positive and negative terminals.
4. After operating for a maximum of 30 minutes, stop the pump and allow it to rest for 20 minutes.
5. Do not approach the pump with fire during operation.
6. After transferring the liquid, completely empty any remaining liquid from the pump.

• Voltage: 24 V
• Efficiency: 30 L/min (17 liters per minute)
• Max Pressure Height (h): 5 m
• Cable Length: 3 m