2'' 50 mm Outer Diameter Slim Submersible Pump with 10 Meter Cable, 180 Watt, 55 mss, 1 m³/h

The submersible pump with a 50 mm outer diameter and 2" diameter is the slimmest submersible pump, making it a specialized product. This pump is designed to fit into 60 mm borehole pipes and is intended for use in narrow boreholes where standard submersible pumps cannot be used and in areas where centrifugal pumps are not suitable due to low water levels. 

According to the Above Chart: At 50 meters: 120 liters per hour At 45 meters: 200 liters per hour At 37 meters: 340 liters per hour At 33 meters: 390 liters per hour At 27 meters: 500 liters per hour At 19 meters: 620 liters per hour At 9 meters: 790 liters per hour At 4 meters: 900 liters per hour The pump has a motor power of 220 volts and 180 watts. It can pump water up to a height of 55 meters and can transfer up to 1 ton of water per hour. It has a 1/2" outlet and comes with a 10-meter cable. The product has a stainless steel body and includes a built-in check valve.
Voltaj	:	220 Volt
Watt	:	180 Watt
Head Height	:	55 mss
Water Flow Rate	:	1 m³/h
Outlet	:	1/2"
Cable Length	:	10 meters

STAINLESS STEEL BODY
The submersible pump has a full 304 stainless steel body and includes a built-in check valve. Both the motor and pump housing are made of stainless steel. You can be assured of the pump's high resistance to corrosion.

HIGH FLOW RATE AND DEEP SUBMERSION DEPTH
It can deliver 1 ton of water per hour and pump water up to a height of 55 meters. This product offers low electricity consumption and high efficiency for water supply. Thanks to its patented impeller design, it provides high pressure and flow at low power while also being long-lasting.

FILTER SYSTEM
The stainless steel mesh system is designed to prevent debris and dirt from entering the pump. If your well has just been drilled or if sand is present, we recommend wrapping a fine cloth or mesh around the suction part of the pump when lowering it into the well.
 
MOTOR QUALITY ;
The submersible pump motor is thermally protected and will automatically stop the pump in case of abnormal conditions such as motor jamming or high energy input. The rotor and stator are manufactured with high quality, with the rotor produced to high precision and balanced, and silicone-coated steel strips used.