CACHENG
3.5'' 90 mm Outer Diameter Deep Well Submersible Pump with 10 Meters Cable 550 Watt 110 mss 2.6 m³/h
It is a 3.5" submersible pump with an outer diameter of 90 mm and can fit into 100 mm drilling pipes.
According to the Above Graph
- 95 meters: 500 liters per hour
- 85 meters: 800 liters per hour
- 80 meters: 1 ton per hour
- 70 meters: 1.20 tons per hour
- 58 meters: 1.50 tons per hour
- 44 meters: 1.80 tons per hour
- 28 meters: 2.10 tons per hour
- 10 meters: 2.40 tons per hour
It has a 220 volt, 550 watt motor power. It can pump water up to a height of 110 meters and can transfer up to 2.6 tons of water per hour. It has a 1" outlet and comes with a 10-meter cable.
- Voltage: 220 Volt
- Watt: 550 Watt
- Head Height: 110 mss
- Water Flow Rate: 2.6 m³/h
- Outlet: 1"
- Cable Length: 10 Meters
STAINLESS STEEL BODY
The submersible pump is completely made of 304 stainless steel and features an integrated check valve. Both the motor and the pump body are made of stainless steel. You can be assured of the pump's high resistance to corrosion.
HIGH FLOW RATE AND DEEP SUBMERSION CAPABILITY
It can deliver 2.6 tons of water per hour and can lift water up to a height of 110 meters. This product is energy-efficient with low electricity consumption for water supply. Thanks to its patented impeller design, it provides high pressure and flow rates at low power, ensuring a long lifespan
FILTER SYSTEM
Stainless steel wire mesh system is designed to prevent external sediment and dirt from entering the pump. If your well is newly opened or if sand is coming, we recommend that you wrap a thin cloth or tulle on the suction side when releasing the pump into the well.
MOTOR QUALITY
The submersible pump motor is thermally protected, it automatically stops the pump when an abnormal situation occurs such as motor jamming or high energy. The rotor and stator are produced with high quality, high precision production is made in the rotor without balance and silicon steel strips are used on it.
