CACHENG
4'' 100 mm Outer Diameter Deep Well Submersible Pump with 10 Meters Cable 550 Watt 115 mss 2.8 m³/h
The 4" Diameter Submersible Pump
The submersible pump with a 4-inch (100 mm) outer diameter is designed to fit into 100 mm drilled wells.
Performance Curve
According to the graph:
- At 109 meters: 500 liters per hour
- At 97 meters: 800 liters per hour
- At 85 meters: 1 ton per hour
- At 78 meters: 1.20 tons per hour
- At 64 meters: 1.50 tons per hour
- At 49 meters: 1.80 tons per hour
- At 36 meters: 2 tons per hour
- At 15 meters: 2.40 tons per hour
The pump has a 220-volt, 550-watt motor and can pump water up to a height of 115 meters, with a capacity of up to 2.8 tons per hour. It features a 1-inch outlet and comes with a 10-meter cable.
Technical Specifications:
- Voltage: 220 Volts
- Power: 550 Watts
- Max Head: 115 meters
- Water Flow Rate: 2.8 m³/h
- Outlet: 1"
- Cable Length: 10 meters
Stainless Steel Body
The submersible pump is made entirely of 304 stainless steel and includes a built-in check valve. Both the motor and pump body are constructed from stainless steel, ensuring high resistance to corrosion.
High Flow Rate and Deep Submersion
The pump can deliver up to 2.8 tons of water per hour and reach a depth of 115 meters. It is a highly efficient product with low electricity consumption. Thanks to its patented impeller design, it provides high pressure and flow at low power, ensuring long-lasting performance.
Filter System
The pump features a stainless steel mesh system designed to prevent debris and dirt from entering. If your well is newly drilled or has sand, it is recommended to wrap the suction area of the pump with a fine cloth or net when lowering it into the well.
Motor Quality
The submersible pump motor is thermally protected and will automatically shut off in the event of motor overload or high voltage. The rotor and stator are made with high precision, and the rotor is manufactured with silicon steel strips for optimal balance and efficiency.
