Aircol 100 Channel, Pipe Type Round Fan 390 m³/h 2300 RPM - Aircol 100 KF

Aircol 100 Duct, Pipe Type Fan Application Areas

It is suitable for ventilation in various-sized areas such as:

• Residences, offices, public restrooms, shopping malls, gyms, theaters, laboratories, factories, workshops, paint shops, warehouses, garages, etc.
• It is specifically designed for exhausting dirty and polluted air or supplying fresh air from the outside through duct connections.

Aircol 100 Duct, Pipe Type Fan Features

• The body is made of high-quality galvanized steel sheet, making it resistant to rust, heat, and harsh environmental conditions.
• The backward-curved impeller ensures high-pressure airflow, low noise levels, and high efficiency.
• The product has a minimal vibration level and has successfully passed dynamic and static balance tests according to ISO 1940 standards.
• The IP55-rated terminal box ensures easy electrical connection.
• The mounting accessory allows installation in the desired position.
• Available in different sizes, making it suitable for various spaces.
• The IPX4 protection rating safeguards the product against water splashes.
• The motor is rated IP44 and belongs to the F insulation class.
• The product is manufactured in compliance with EN 60335-2-80, Low Voltage Equipment [2006/95/EC], and Electromagnetic Compatibility [2004/108/EC] standards.
• It comes with a standard on/off button.
• It can operate at the desired speed and RPM when used with speed control devices.
• In hot environments, the motor is protected from overheating with a thermal protection sensor (thermal switch).
  
  
  

  Aircol 100 Duct, Pipe Type Fan Installation Steps

  1. Drill two Ø8mm diameter holes 170mm apart on the mounting surface.
  2. Insert the wall plugs provided with the product into the holes, then partially tighten the screws using a socket wrench or screwdriver.
  3. Place the mounting bracket of the in-duct fan into the prepared screw slots and slide it down into position.
  4. Fully tighten the screws with a socket wrench to securely fasten the in-duct fan.
  5. Finally, attach the ventilation duct to the in-duct fan using mounting clamps to complete the installation.