Aircol 150 Channel, Pipe Type Round Fan 650 m³/h 1530 RPM - Aircol 150 KF

Aircol 150 Duct, Pipe Type Fan Applications Suitable for ventilation in various sizes of spaces: Homes, offices, public toilets, shopping malls, gyms, theaters, laboratories, factories, workshops, paint shops, warehouses, garages, etc.

It is specifically designed for use in extracting bad and polluted air from the inside or supplying fresh air from the outside by connecting with pipes. Aircol 150 Duct, Pipe Type Fan Features The body is made of high-quality galvanized steel, ensuring resistance to rust, heat, and harsh environmental conditions. The backward-curved impeller provides high-pressure airflow, low noise levels, and high efficiency. The product has minimal vibration and has successfully passed dynamic and static balance tests according to ISO 1940 standards. The IP55-rated terminal box allows for easy electrical connection. The mounting bracket provided with the product allows installation in the desired position. Available in different sizes to accommodate various space dimensions. The product is protected against water splashes with an IPX4 rating. The motor is IP44 rated and belongs to F insulation class. The product is manufactured in compliance with EN 60335-2-80, Low Voltage Equipment [2006/95/EC], and Electromagnetic Compatibility [2004/108/EC] standards. Can be used with the standard on/off switch. Can be used with speed controllers to achieve the desired speed and RPM. Features thermal protection with a heat sensor (thermic) to prevent motor overheating in hot environments.

Aircol 150 Duct, Pipe Type Fan Installation Steps

1. On the mounting surface, drill two Ø8mm holes spaced 170mm apart.
2. After placing the provided anchors in the drilled holes, tighten the screws with a wrench or screwdriver, leaving a certain distance as shown.
3. As shown in the figure, place the mounting bracket of the fan into the prepared screw holes and slide it downward.
4. Tighten the screws with a wrench to secure the fan in place.
5. Finally, install the ventilation pipe onto the fan using mounting clamps as shown to complete the installation.