Aircol 200 Channel Pipe Type Round Fan 1000h 2600 RPM - Aircol 200 KF

Aircol 200 Ducted Inline Fan – Usage Areas

Suitable for ventilation in various spaces such as:

• Residential buildings, offices, public restrooms, shopping malls, gyms, theaters, laboratories, factories, workshops, paint booths, warehouses, garages, and more.
• Specifically designed for connection via ducts to either remove polluted air from the interior or supply fresh air from the outside.

Aircol 200 Ducted Inline Fan – Features

• The housing is made of high-quality galvanized steel, ensuring resistance to rust, heat, and harsh environmental conditions.
• The backward-curved impeller provides high-pressure airflow, low noise levels, and high efficiency.
• Designed with minimal vibration levels, successfully passing dynamic and static balance tests per ISO 1940 standards.
• The IP55-rated terminal box allows for easy electrical connection.
• Includes a mounting bracket for flexible installation in different positions.
• Available in different sizes, making it suitable for various spaces.
• Water splash-resistant with an IPX4 rating.
• The motor has an IP44 protection class and falls under insulation class F.
• Manufactured in compliance with EN 60335-2-80, Low Voltage Equipment [2006/95/EC], and Electromagnetic Compatibility [2004/108/EC] standards.
• Can be used with a standard on/off switch.
• Compatible with speed controllers, allowing for adjustable speed and RPM.
• Equipped with a thermal sensor (overheat protection) to prevent motor overheating in hot environments.

Aircol 200 Ducted Inline Fan – Dimensions

Aircol 200 Ducted Inline Fan – Installation Steps

1. Drill two Ø8mm holes 170mm apart in the mounting surface.
2. Insert the provided wall plugs into the holes and fasten the screws using a socket wrench or screwdriver, leaving a slight gap.
3. As shown in the diagram, position the mounting bracket of the inline fan onto the screws and slide it downward into place.
4. Secure the screws tightly using a socket wrench to complete the fan installation.
5. Finally, as illustrated, connect the ventilation duct to the inline fan using mounting clamps to complete the setup.