Aircol 125 Channel, Pipe Type Round Fan 550 m³/h 2330 RPM - Aircol 125 KF

Aircol 125 Duct, Pipe Type Fan Usage Areas Ideal for ventilation in various spaces such as homes, offices, public restrooms, shopping centers, gyms, theaters, laboratories, factories, workshops, paint shops, warehouses, garages, and similar locations. Designed specifically to be connected through ducts for either venting out polluted air or supplying clean air from outside.

Aircol 125 Duct, Pipe Type Fan Features

• The body is made of high-quality galvanized steel, making it resistant to rust, heat, and harsh environmental conditions.
• The backward-curved impeller provides high-pressure airflow, low noise, and high efficiency.
• The product has minimal vibration and has successfully passed dynamic and static balance tests according to ISO 1940 standards.
• The IP55-rated junction box allows for easy electrical connections.
• It includes a mounting bracket, allowing installation in any desired position.
• Available in various sizes, making it suitable for different-sized spaces.
• Equipped with IPX4 protection against water splashes.
• The motor has IP44 protection and is rated with F insulation.
• Manufactured in compliance with EN 60335-2-80, Low Voltage Equipment [2006/95/EC], and Electromagnetic Compatibility [2004/108/EC] standards.
• Comes with a standard on/off switch.
• Can be used at different speeds and rotations when paired with speed controllers.
• Includes a thermal sensor (overload protection) to prevent motor overheating in hot environments.

Aircol 125 Duct, Pipe Type Fan Installation Steps

1. Drill two Ø8mm diameter holes 170 mm apart on the mounting surface.
2. Insert the provided wall plugs into the holes, and then partially tighten the screws with a socket or screwdriver as shown.
3. Slide the fan mounting bracket into the prepared screw slots as shown in the figure.
4. Fully tighten the screws with a socket to secure the fan.
5. Finally, attach the ventilation duct to the fan using the mounting clamps to complete the installation.