Aircol MOP 45/120 Automatic Vented Decorative Aspirator

Aircol MOP 45/120 Automatic Grille Active and Sleep Mode Extractor Features

The automatic grille provides two different airflow rates (45/120 m³/hour and 30/60 m³/hour) thanks to its electronic board, with Active Mode and Sleep Mode options. When triggered by a switch, the automatic grille provides ventilation in Active Mode, and after 30 minutes, it switches to Sleep Mode for ventilation.

With its very fine and elegant front appearance, it is an indispensable part of decorative spaces.

Thanks to its patented and specially designed adjustable mounting mechanism, it can be easily installed on ceilings with thicknesses ranging from 0.5 mm to 20 mm without drilling any holes for screws.

Made from high-quality ABS plastic, our product provides the best protection against bad odors, moisture, and similar external factors while maintaining its original appearance without ever fading.

The seal at the air outlet minimizes any air leakage that may occur during the pipe connection.

It can be easily connected vertically or horizontally to walls, ceilings, etc.

The front grille, which is exposed to dust, can be easily removed for cleaning by wiping or washing.

Thanks to its optimally designed body and air discharge path, both the noise level is minimized and high-pressure (40 Pa ~160 Pa) air suction is achieved.

Our product has IPX1 protection and does not require an earth connection, conforming to Class-II protection standards.

Aircol MOP 45/120 Automatic Grille Active and Sleep Mode Extractor Usage Options

• Suitable for Key or Sensor Operation: Can be used directly or connected in parallel with a light switch using the on/off button.
• Suitable for Timer Operation: With the electronic board's timer, the automatic grille can be set to switch to Sleep Mode 30 minutes after being triggered.

Aircol MOP 45/120 Automatic Grille Active and Sleep Mode Extractor Installation

1. Drill a hole with dimensions 180mm x 180mm on the mounting surface.
2. Ensure the mounting bracket's clips are fully pushed into the grille.
3. Then, place the grille into the hole as shown.
4. Push the clips of the adjustable mounting bracket outward to secure the grille to the ceiling.
5. Tighten the screws of the adjustable mounting mechanism to install the grille on the ceiling.
6. Finally, attach the front cover of the grille to the body to complete the installation.