Cacheng CMP 20 RM Magnetic Pump, Chemical and Acid Pump Single Phase (220V)

What is the CMP 20RM Magnetic Pump?

The general characteristics of magnetic pumps include a rotating impeller contained in a closed housing, supported by a magnetic field produced by magnets. The rotation of the impeller generates a force that feeds the liquid both inside and outside the pump's housing. The primary purpose of the pump is to maintain energy and motion within a liquid.

In magnetic pumps, there are magnets connected to the impeller and motor. Permanent magnets are attached to the pump's drive assembly. The driving magnet is connected to a second shaft driven by the motor, which rotates the magnet when the motor is turned on. The magnetic force from the motor's magnet enables the magnet in the impeller to rotate, thus turning the impeller.

Magnetic pumps are centrifugal pumps, meaning that the liquid pumped through the system exits at a different point than where it was drawn into the pump. The rotation of the impeller causes an increase in the energy of the liquid and raises the pressure at which the liquid exits the pump. This increase in pressure is what allows the fluid to move.

Pump Body: GFRPP Polypropylene
Impeller: GFRPP Polypropylene
Package Dimensions (W x D x H): 14 x 24 x 14 cm
Weight (boxed): 1.5 kg

MAGNETIC PUMPS DO NOT HAVE SUCTION; THEY OPERATE WITH FLOW AND DO NOT CREATE VACUUM.

It has a threaded connection.

CMP 20RM Magnetic Pump Features

• Motor Power: 15 watts
• Inlet/Outlet: 18 mm - THREADED CONNECTION
• Suction Depth: CANNOT SUCK.
• Maximum Head Height: 3.1 meters
• Maximum Flow Rate: 27 liters/minute
• Max. Liquid Temperature: Range of 0°C to 82°C
• Voltage: 50 Hz - 220 Volts
• All surfaces in contact with liquid are polypropylene.

Polypropylene

Polypropylene has good resistance to acids and is preferred in food, chemical, and cosmetic products. It is suitable for use at temperatures ranging from 0°C to 82°C.

Fluids Suitable for Pump Use